Send the beacon scan results to the server

If you are using only one obnizBLEGateway, the system will be simple.
The system configuration would look like this

A single obniz device can be used to detect multiple BLE Beacon devices.

The basic flow of the program is as follows

  1. Establish a connection to multiple obniz devices.
  2. Initialize the BLE system
  3. Start scan for peripheral BLE devices
  4. Save the scan results to a database or other location
  5. Repeat 3 to 4.

Here's what it looks like in concrete terms.



var obniz = new Obniz("OBNIZ_ID_HERE");

//  Establish a connection to multiple obniz devices.
obniz.onconnect = async function () {


  //Initialize the BLE system
  await obniz.ble.initWait();

  obniz.ble.scan.onfind = function(peripheral){
    console.log(peripheral.localName);

    // Save the scan results to a database or other location
    sendToDatabase(peripheral);
  };

  obniz.ble.scan.onfinish = async function(peripherals, error){
    console.log("scan timeout!")

    // Start scan for peripheral BLE devices
    await obniz.ble.scan.startWait();
  };

  // Start scan for peripheral BLE devices
  await obniz.ble.scan.startWait();


}

function sendToDatabase() {
  ...
}

By customizing the above program, you can have more detailed control.
Please refer to How to use BLE in obnizjs to customize the program.

For example, here are some articles that can help you

  • If you want to narrow down your scan results
    Set ScanTarget in conditional search

  • I want to reduce the amount of communication.
    Filter by device to reduce traffic E3%82%A3%E3%83%AB%E3%82%BF%E3%83%AA%E3%83%B3%E3%82%B0%E3%82%92%E3%81%97%E3%81%A6%E9%80%9A%E4%BF%A1%E9%87%8F%E3%82%92%E5%89%8A%E6%B 8%9B%E3%81%99%E3%82%8B)

  • I want to scan all the time, not just every 30 seconds.
    Set up ScanSetting in conditional search
  • I want to receive multiple advertisements from the same device
    Set up ScanSetting in conditional search

The basic flow of the program is as follows

Establish a connection with an obniz device
2. initialize the BLE system
3. perform a scan for peripheral BLE devices
4. save the scan results to a database or other location
5. repeat 3 to 4.