Use android app for operation

Once you have created the facility and operations, you will be able to run the operations in your Android application.

Requirements

Android device

Required Operating Conditions

  • Android 10 or higher

  • Internet connection via Wi-fi or cellular

    Confirmed devices

  • DIGNO BX(901KC)

    obniz device

    obnizOS 3.5.0 or higher

Android application installation

Please install the obniz device setting app from here.

Get it on Google Play

How to use

Open the operation URL in the browser of the android app, and the device setting app will start automatically.
A list of instruction IDs will appear, and press it.

Selecting the instruction ID will take you to the actual device settings screen.
Follow the instructions on the screen to turn on your obniz device and press the "Start Settings" button.

The nearest obniz device will be displayed automatically, so press "Connect".
If there are multiple offline obniz devices around, an error will occur because the device to be configured cannot be identified. If there are multiple offline obniz devices around, an error will occur because the device to be configured cannot be identified.

If you wait for a while, the settings will be written automatically and the configuration will be completed.
If the operation requires a description of the installation location or a photo, an input field will appear if necessary, so please follow the instructions.

Once the completion report is sent, you will be able to view it in the cloud.
You can also check it in the Work Completed tab of the list.

When an error occurs

If an error occurs during the setup, such as a wrong Wi-Fi password, you can report it.
The report can be viewed in the cloud.

関連の質問