obnizOS establishes a constant connection with obnizCloud during startup.
Some parts of the network may not change even if the network is different, but here are the common details.
After startup: for unconfigured devices
- Setup is accepted after startup (less than 1 second)
- Reset (IO etc. will be set to the initial state)
- If you don't have a device key, you will be waiting to enter it
- If you don't have a network setup, you will be waiting for the input
After startup: if the network has been configured
- Setup is accepted after startup (less than 1 second)
- Reset (IO etc. will be set to the initial state)
- Connect to the network.
The connection method and flow depends on whether you are using Wi-Fi or Ethernet. For more information, please refer to the respective pages.To learn more about the protocols used in a network, please see the Network section. - It will be online.
Checking the connection log
You can view the connection history for each device in your account. Please see below for more information.
/doc/reference/cloud/device-management/